Collection: Forklift Battery Chargers

Industrial battery chargers for electric forklifts, lift trucks, pallet trucks, order pickers, floor scrubbers and aerial work platforms. High-frequency chargers run cooler and draw less energy per charge than the older ferroresonant units they usually replace, and they can be set for flooded lead acid, AGM, gel or lithium packs.

Choosing a forklift charger

Three things decide the model: your battery voltage, the supply you have at the charging bay, and how fast the truck has to be back in service.

  • Battery voltage must match the pack exactly. Browse 24 volt, 36 volt, 48 volt and 80 volt chargers. 72V and 96V models are also available.
  • Supply. Single phase units run on 110VAC or 220VAC standard shop power. Three phase units take 220VAC, 480VAC or 600VAC and reach much higher output.
  • Output current sets charge time. As a rule of thumb, a conventional overnight charge is sized near 16 to 20 percent of the battery's amp-hour rating; opportunity and fast charging run higher and need a battery rated for it. Check the battery manufacturer's limit before sizing up.

Working out what you need? Read how to size a forklift battery charger โ€” voltage, amp-hours, charge time, supply, charge profile and connector, with a worked example.

Chargers are matched to the battery, not to the truck badge, so these fit any make. If you are replacing a charger on a Crown, Toyota, Raymond, Hyster, Yale, Clark or Linde truck, see the forklift battery charger cross reference by brand.

Range covers 20A to 300A output across 110VAC to 600VAC input. Questions on sizing a replacement? Call 717-421-9988.